Professional concrete services have the equipment and crew necessary to get the job done quickly and correctly. They also have access to bulk discounts on materials that can save you a lot of money in the long run.
For large projects, contractors may use concrete made from a pre-mixed batch plant that is delivered to the site in mixer trucks. This method allows the contractor to achieve precise ratios of water, cement, sand/gravel, and admixtures. If you are thinking of installing or making a new concrete project, contact Concrete Contractors Colorado Springs today!
Ready-Mixed
You’ve seen it all over the place, those cement trucks with their massive, rotating drums that can make concrete on the fly. Ready mix is the popular choice for construction projects that require durable and fast-setting materials, like foundations, roads, and floors. It’s the easiest, most economical way to create new build materials that can be customized to your specific project.
It starts at a local batch plant where the concrete ingredients are gathered and mixed to precise specifications. The process takes into account the amount of water needed to provide workability, as well as the strength required for your job’s particular applications and climate.
Once the ingredients are mixed, they’re loaded into a truck for delivery to the construction site. Depending on your job’s specifications, you might have to pay for additional specialized equipment to get the concrete into your forms. For larger jobs, the truck may be accompanied by a concrete pump.
If you’re preparing for a concrete pour, it’s important to communicate your needs and expectations to the supplier. Be sure to let them know about your project’s anticipated exposure and service conditions so that they can recommend a concrete mix with the right properties. They should also be able to advise you on appropriate admixtures that will help with performance, such as air entrainers and water reducers.
If you’re planning a larger concrete project, you can speed up your job by giving your supplier plenty of advance notice and scheduling deliveries at time intervals that are consistent with how long it will take your crew to place the concrete. This will allow you to avoid the need for costly re-dos or delays caused by insufficient or unsuitable concrete. It’s also important to plan for the number of trucks you will need, and how long it will take for each truckload to be delivered. It’s best to schedule them to arrive an hour apart, as fresh concrete loses its workability if it sits for too long in the mixer.
Structural
Concrete is a very versatile building material, used to construct everything from roads and sidewalks to foundations and floors. However, just like any other construction material, it will degrade over time. This deterioration compromises the structural integrity of your facility and structures, reduces the life of your equipment, and creates hazardous conditions. Concrete repair techniques are designed to restore a concrete structure’s structural integrity and return it to its original design load capacity.
Reinforced concrete contractors can provide a variety of construction services, including foundation construction. This process involves forming and installing the concrete foundations for your building, subgrade walls, stairways, walkways, floors, and footings. In addition, your structural concrete contractor can help you design and build concrete buildings that meet your specific design preferences.
Structural concrete contractors can also help you repair damaged concrete surfaces. They can perform epoxy injection, which injects a high-strength polymer into cracks and fissures to repair the damage. They can also apply polyurethane coatings, which seal the surface of your concrete to prevent further degradation and protect the structural integrity of your facility.
Another service provided by structural concrete contractors is bridge construction. They can build new bridges or repair existing ones, and they can also help you design a concrete roadway to replace asphalt or cement. This can improve your traffic flow and safety, as well as enhance the aesthetics of your roadway.
In addition to concrete construction, many structural concrete contractors offer precast concrete fabrication and installation. These concrete components are made in a controlled factory environment, reducing project site risk, decreasing weather-related delays, and ensuring precise compliance with PCI standards. These components can then be transported to the job site for assembly and installation.
Structural concrete services can also assist with resurfacing and waterproofing. These services can help you create a safe, durable, and attractive concrete surface for your facility. In addition, a good structural concrete company can also help you find solutions for your water and wastewater infrastructure. They can repair leaks and voids, install waterproofing systems, and replace expansion joints.
Precast
Precast concrete is made on-site or in a factory and is usually used for structural elements like beams, columns, and floor slabs. It can also be used to make wall and cladding panels for buildings. It is often used in conjunction with other construction materials such as steel and in-situ concrete to create a building structure that meets design specifications.
Commercial precast manufacturers use a variety of manufacturing processes to produce concrete that is durable and aesthetically pleasing. These include storing raw materials such as cement, aggregates, and admixtures. These materials are then mixed in a batching plant and stored in a casting yard. The cast concrete is then cured in a curing shed. This shed is protected from sunlight and wind to ensure good quality concrete.
The process of precasting involves the construction of formwork that is then filled with concrete and cured. It is possible to install plumbing and electrical services in a precast structure before it is delivered to the construction site. This helps to reduce installation time on the job site. It is also possible to produce one-off precast structures such as sculptures using this method.
A key advantage of precast concrete is that it can be produced in a factory, where there are no weather conditions to interfere with production and delivery times. This makes it a much more reliable building material than in-situ concrete. It is also less costly since labor costs are reduced.
Precast concrete has an incredibly long lifespan and can withstand extreme weather conditions. It can be molded into almost any shape, making it ideal for building facades and other structural applications. It can also be stained to achieve a range of different finishes and colors.
The most common application of precast concrete is for residential building structures. It offers higher levels of acoustic separation than other common building construction systems, particularly in external walls. Precast concrete also provides one of the best energy efficiency ratings of any building construction system. It is also less prone to water damage than in-situ concrete and can be easily repaired.
Repair
Concrete is one of the most versatile construction materials and is used for a variety of projects. However, it is prone to deterioration over time and needs regular maintenance to keep it in good condition. Without repair, it can cause safety hazards, compromise the structural integrity of a building, or make it look unattractive. Fortunately, several different types of concrete services can help with this issue.
Concrete services range from pouring new concrete structures to repairing existing ones. Some of the most common services include foundation repairs, sidewalk repair, and crack filling. Choosing the right service is important as it can affect the quality of your finished project. If you’re unsure which type of service you need, consider consulting a professional concrete contractor for advice.
When you’re looking for a concrete company, it’s important to choose a professional who has the right experience and certifications. It’s also a good idea to check out their portfolio and credentials before hiring them. This will ensure that you’re getting the best possible results for your project.
For concrete repairs, it is necessary to select a suitable repair material that will bond well with the existing concrete. This will ensure that the repair is strong enough to carry the design loads, durable enough to withstand weathering, and economical in terms of initial cost and ultimate service life. The selection of the repair material should also take into account other factors, such as its dimensional characteristics (drying shrinkage), thermal coefficients, and freezing/thawing resistance.
The different methods of repairing concrete cracks include epoxy injection, routing and sealing, stitching, drilling and plugging, and gravity filling. Before using any of these methods, it is essential to remove the loose or unsound concrete and clean the area. In addition, a proper bonding system should be used between the old and new concrete to prevent premature cracking and debonding. For this, a bond coat of equal amounts of sand and cement should be applied to the surface before the placement of the concrete. This can be achieved by using a spray application or by applying latex emulsions with cement.
